Toyota 120 Platforms Forum

Toyota 120 Platforms Forum (
-   Suspension and Tires (
-   -   Front Stabilizer Bar 48811-60230 vs. 48811-60240 (

AlexJet 05-23-2020 05:13 AM

Front Stabilizer Bar 48811-60230 vs. 48811-60240
Does anyone knows what is the difference between front stabilizer bars for 4th Gen 4Runners? There are 2 part numbers exist in the catalog:
- 48811-60230
- 48811-60240
I'm searching online catalogs and web, but struggling to find specs on the bars to see what is the difference between them.

Mikestang 05-23-2020 01:48 PM

The 4x4 one is thicker than the 2x4 one. The 4-wheel drive swaybar measures 3-15/16" (100mm) circumference . The 2-wheel drive swaybar measures 3-3/4" (95.2mm). I recommend the 4x4 one for the 2x4 application, better handling. And I recommend the 2x4 one for 4x4, better flex. But I don't know which is which by the part #.

bulldog 05-24-2020 05:33 PM

Also if you switch to the 29mm (thinner swaybar) that the FJC and 2x4 used you will need the bushings that works with it.

From back in the day - has the part # for the thinner one

Chalk Outline 06-09-2020 10:11 PM

Late Question
I need need new bushings for my swaybar too. Do you know the diameter of the stock V6 4x4? Any advantage to going with poly over rubber?

Darklight 06-11-2020 05:22 PM

As far as the bushings check this out. I ran these for a while and they worked great.

Darklight 06-11-2020 05:26 PM

FYI the 60240 is the 2wd stabilizer bar :)

my034runner 06-30-2020 08:55 AM

Sway bar??? What Sway bar???!!! I took mine off years ago!!! :rockon:

Darklight 06-30-2020 10:44 AM

Yeah we don’t need no stinking sway bars

007-FJC 08-21-2020 10:21 PM

Sway bars? I'm good off those.

All times are GMT -7. The time now is 08:08 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2005-2013