View Single Post
Unread 11-26-2012, 10:04 AM   #6
Senior Driver
t4rman's Avatar
Join Date: Feb 2011
Location: North Texas
Posts: 720

Thanks Ludedude. I'll try those out and report back which wire they go to.

Loose_electron, I have a SPDT mixed in with my SPST. One thing that confused me was the differences in the top light (accessory on) circuit. On the SPDT you have to run the upper light negative to the accessory negative (the lead running to whatever you are powering). That way it comes on when the switch is in both upper and lower on positions. Hope that helps a little bit.

I'm sure that if someone can wire a set of these switches and get everything working there is not a whole lot they can't wire! Especially with toyota's backwards dimming
4Runner Build
t4rman is offline   Reply With Quote