Toyota 120 Platforms Forum
Google only search Toyota120

Go Back   Toyota 120 Platforms Forum > Technical write ups > Mechanical

Closed Thread
Thread Tools Display Modes
Unread 04-17-2013, 07:55 PM   #1
Robinhood4x4
Driver
 
Join Date: Sep 2007
Posts: 253
Default Auto Transmission Cooler Install into a V6 2007 4Runner

Having bought a small popup trailer a few years ago and living in one of the hottest parts of the country with lots of high altitude mountains, I thought it would be prudent to install a tranny cooler. This is especially true since I was getting these kind of temperatures when towing. http://www.toyota120.com/forum/showthread.php?t=22732

I ended up getting the derale series 8000 cooler from etrailer. http://www.etrailer.com/Transmission...eid=2007759266

As usual, these things come with the zip ties that wear holes into radiators so I decided I'd just make my own bracket out of 1/8" thick, 3/4" wide flat stock.



For the top mounting point, I just reused the holes the horns are mounted to, but for the bottom I had to drill holes into the support beam. However, my Ridgid cordless drill was too big to fit in that area, so I had to use a dremel with a cutting bit to shave a hole into it.


I didn't want to slip and drill a hole into the AC condenser that was about 1" away so I taped a piece of steel to it to protect it.


Here's the bracket bolting into place.


And here's everything else bolted in place. Note the small bracket I made to support the hose on the left. It bolts into the hole that is used to support the stock V8 tranny cooler.


And here's a shot from underneath where it ties into the return line for the transmission.



Some notes:

This is for a V6 engine.

I ordered an extra 4 feet of transmission line from amazon and I only had 1 foot left over between it and the hose that came with the kit.

This guy provided a good write up on how he did his install and I used his pics to figure out which line was the supply and which line is the return. I sure hope he is right! http://www.toyota120.com/forum/showthread.php?t=21501

So based on this, the line that goes into the top of the radiator is the supply to the radiator. The line that comes from the bottom of the radiator is the return to the transmission. I plumbed a hose from the bottom of the radiator, to the cooler, then plumbed a hose to the hard line back into the transmission. The nicely cleaned hose and hardline in the above picture is going back into the transmission.

I hardly lost any fluid, maybe only a tablespoon.

After the install, I took it around the block and then the next day took it into the dealer for a full tranny flush.

From the scan gauge, the temps definitely seem cooler, but I've only driven it to work a couple days. Over the next few months will be the real test and I'll post back what I find.
__________________
1993 4Runner, V6, Auto Tranny, SAS.
2007 4Runner, 4wd, SR5, V6, Toytech bilstein lift.
Robinhood4x4 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Got P0430 code on my 04 V6 SR5 T4R superdjl 4th Gen 4Runner & Hilux Surf 51 10-31-2015 01:33 PM
Ben's 2007 Toyota 4Runner Sport Edition Build Thread BenSwayne Gallery 14 06-17-2015 12:25 AM
Auto Transmission Cooler Install into a 2007 4Runner Robinhood4x4 4th Gen 4Runner & Hilux Surf 10 04-20-2013 10:10 PM
2006 4.0L Transmission cooler installation, with some pics. Mike P. 4th Gen 4Runner & Hilux Surf 4 09-19-2011 11:25 AM
Oceano Dunes, CA Oct. 12th-14th slosurfer Meeting, Trail run and Expedition planning 79 10-14-2007 07:20 PM


All times are GMT -7. The time now is 02:42 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2005-2013 Toyota120.com