![]() |
#1 |
Rookie
Join Date: May 2017
Posts: 33
|
![]()
Hi
I am getting some really bad noises from the front. First I drove around and recorded a video. Then I figured there was a minor leak in Passenger CV boot and jacked her up and recorded video while turning wheel with hand. Is this bearing or CV? Will boot change with grease fix it or the CVs busted? https://www.youtube.com/watch?v=gJHgMwHWa3c https://www.youtube.com/watch?v=AswYrPzzJoA |
![]() |
![]() |
![]() |
#2 |
White Boomer (Kangaroo)
Join Date: Jun 2005
Location: SoCal
Posts: 5,881
|
![]()
Sounds like one of a few things, a busted bearing on the tripod on the CV or possibly a broken tooth or two on the front ring gear (less likely)
__________________
04 V8 SE, Completion date July 24: RST Solid axles Swap, Atlas Crawl Case, 40" Cooper STT Pro's on Fuel Anza D116 Beadlocks, 5:38 gear set, ADS Coilovers, 4x4 labs R.Bumper. |
![]() |
![]() |
![]() |
#3 |
Rookie
Join Date: May 2017
Posts: 33
|
![]()
Took of wheel and saw tie rod end busted. Is pushing against brake shied on turn. Scratch marks on brake shield. I have to get tie rods fixed anyways now
This could be the not so expensive cause I hope Capture.JPG Heading to Toy connection tomorrow |
![]() |
![]() |
![]() |
#4 |
White Boomer (Kangaroo)
Join Date: Jun 2005
Location: SoCal
Posts: 5,881
|
![]()
Tie rod or lower ball joint? Yikes. Err don't drive that thing!
__________________
04 V8 SE, Completion date July 24: RST Solid axles Swap, Atlas Crawl Case, 40" Cooper STT Pro's on Fuel Anza D116 Beadlocks, 5:38 gear set, ADS Coilovers, 4x4 labs R.Bumper. |
![]() |
![]() |
![]() |
#5 |
Rookie
Join Date: May 2017
Posts: 33
|
![]()
Okay, got it fixed. It was the CV. Go it off a salvage yard vehicle (low miles - 50K) in perfect condition
|
![]() |
![]() |
![]() |
#6 |
White Boomer (Kangaroo)
Join Date: Jun 2005
Location: SoCal
Posts: 5,881
|
![]()
Glad you got it sorted but you said CV but before you said it was a busted tie rod. Confused???
BTW your lower ball joint rubber bushing looks trashed.
__________________
04 V8 SE, Completion date July 24: RST Solid axles Swap, Atlas Crawl Case, 40" Cooper STT Pro's on Fuel Anza D116 Beadlocks, 5:38 gear set, ADS Coilovers, 4x4 labs R.Bumper. |
![]() |
![]() |
![]() |
#7 |
Rookie
Join Date: May 2017
Posts: 33
|
![]() |
![]() |
![]() |
![]() |
#8 |
Rookie
Join Date: Jul 2016
Posts: 6
|
![]()
i've got an oem cv joint that is in good condition but has a torn inner boot if anyone wants it for a rebuild/replacement. just pm me or gregoryrubin@comcast.net
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
GX 470 Conversion and Lift. Need some advice and education | blackcats | GX470 | 1 | 10-09-2017 03:24 PM |
ARB Bumper for GX 470 where to get?Install? $$? | tonybui99 | GX470 | 1 | 09-14-2017 07:10 AM |
Gx 470 Drivetrain Vibration | blackcats | GX470 | 2 | 08-23-2017 06:48 PM |
Lx 470 vs gx 470 | kablamo | GX470 | 4 | 10-17-2016 06:32 PM |
My first GX 470! | ovreagr | GX470 | 6 | 11-18-2012 02:55 PM |