Toyota 120 Platforms Forum
Google only search Toyota120

Go Back   Toyota 120 Platforms Forum > Gallery > Gallery

Reply
 
Thread Tools Display Modes
Old 08-14-2010, 01:44 PM   #1
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default .....

.....

Last edited by shuly; 05-16-2012 at 07:37 PM. Reason: .....
shuly is offline   Reply With Quote
Old 08-14-2010, 01:44 PM   #2
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:37 PM.
shuly is offline   Reply With Quote
Old 08-14-2010, 05:51 PM   #3
4wheelrunner
Driver
 
Join Date: Feb 2009
Location: Fremont
Posts: 97
Default

Lookin good
How did you mount the front plate over the fairlead.. looks like you're using wing nuts.
__________________
2004 4x4 4Runner SR5 white, OW 2.5 Full suspension, OW rear link, 16x8 Raceline, 285x75x16 GY Duratrac, Demello weld-on hybrid sliders, SS brake lines, Light Racing UCA, ARB rear locker, Shrockworks bumper with PIAA 510 Ion and LF Striker 170s, CBI rear bumper, kurtfab diff bracket, BudBuilt skids, Smittybilt XRC10 Comp series winch
4wheelrunner is offline   Reply With Quote
Old 08-14-2010, 05:58 PM   #4
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-14-2010, 07:24 PM   #5
PapaSmurf009
Peach State PreRunner
 
PapaSmurf009's Avatar
 
Join Date: Aug 2010
Location: Macon, Ga
Posts: 414
Default

Looks great. Which BajaRack model is that?

Jim
PapaSmurf009 is offline   Reply With Quote
Old 08-14-2010, 07:34 PM   #6
BlairB
Senior Driver
 
BlairB's Avatar
 
Join Date: Apr 2008
Location: San Francisco, California
Posts: 949
Default

Quote:
Originally Posted by PapaSmurf009 View Post
Looks great. Which BajaRack model is that?

Jim
It is the 4th generation 4Runner model.
__________________
Blair- KJ6RHM

2008 4Runner Sport Edition 4WD V6 Build Thread
2014 4Runner Limited
BlairB is offline   Reply With Quote
Old 08-14-2010, 08:52 PM   #7
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-14-2010, 09:07 PM   #8
PapaSmurf009
Peach State PreRunner
 
PapaSmurf009's Avatar
 
Join Date: Aug 2010
Location: Macon, Ga
Posts: 414
Default

Quote:
Originally Posted by shuly View Post
As Blair said...the T4R 4th gen rack....yes it does fit the Limited models

http://www.bajarack.com/toyota-4runner-4g
Thanks. How would I mount it since mine car has the factory cross rails? Or would I have to take them off?

Jim
PapaSmurf009 is offline   Reply With Quote
Old 08-14-2010, 09:16 PM   #9
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-14-2010, 09:45 PM   #10
shabaka
Senior Driver
 
shabaka's Avatar
 
Join Date: Jun 2007
Posts: 524
Default

looks real good...!!!

these racks are super easy to install
to me all of 45min to remove the factory "rack" and install the BajaRack

are those BajaRack mounts too for your gear??
__________________

. . . . . . . . . . . .. .. .. . Yukon 4.88, ARB locker, Truetrac LSD, Camburg UCA, Custom Rear LCA, Energy Suspension
.... .. .... ... ..... ... .. ...Braille dual battery, Bulldog ALPHA 9300, Viking 3/8 rope, Gunnebo hook, BajaRack, Slimlites

.... .. .... ... ..... ... .. ...build & gallery
shabaka is offline   Reply With Quote
Old 08-14-2010, 09:56 PM   #11
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-14-2010, 10:40 PM   #12
Mikestang
Don't follow this guy
 
Mikestang's Avatar
 
Join Date: Jun 2006
Location: Alta Loma, CA
Posts: 4,027
Default

Love my BajaRack! Looks good, it will serve you well.
__________________
'07 Ltd 4Runner v8 4x4 - Midland 75-822 + Wilson 5000, Garmin 276c, Magnaflow catback, Kurtfab front diff brace, 265/70/17 Goodyear SA on Robby Gordon Signatures, Spidertrax, 3/4" BL, BajaRack, 2wd sway, Icon front, Overland Warehouse rear, Kurtfab v2.1 LCAs, MedicLinks, Slee SS lines, BB skids, Demello sliders & LCA ramps, All-Pro diff guard, TC full gusseted front, SW bumper
www.mikestang.com
Mikestang is offline   Reply With Quote
Old 08-15-2010, 09:56 AM   #13
PapaSmurf009
Peach State PreRunner
 
PapaSmurf009's Avatar
 
Join Date: Aug 2010
Location: Macon, Ga
Posts: 414
Default

Quote:
Originally Posted by shuly View Post
It is fairly easy to do. Just a few bolts. You completely remove the factory cross bars & the side rails. The rack bolts into the factory bolt holes. The only thing I did different was add a dash of locktight to the bolt threads holding the brackets to the roof of the vehicle. There are nylock nuts holding the rack to the brackets so I figured those should hold just fine.

I think the only difficulty I had was figuring how in the heck to remove the plastic covers holding the cross bars in. It was easy after figuring out the first one. Just slip a screw driver under and pull gently towards you until the clips pop and then wiggle the other side free and you are done. There are 8 bolts holding the factory side rails on. Remove those and then bolt up the new rack. The only thing left to do is trail test it
Thanks for the advice. Is there anyway I could mount them using some of the mounting brackets that would fit with another BajaRack that fits onto your factory cross rails, like the megamule ones for instance?

http://www.bajarack.com/the-mega-mule-1

If you put your mouse over the hyperlink for "What's In The Box" you'll see those mounting brackets. Those are what I was refering to.

Jim
PapaSmurf009 is offline   Reply With Quote
Old 08-15-2010, 02:46 PM   #14
ramoine
Driver
 
ramoine's Avatar
 
Join Date: Aug 2010
Location: Huntington, Indiana
Posts: 67
Default

I really like the way that rack looks , nice !
__________________
Bill
2007 fj 6sp SAW full suspension Ntto trail grappler m/t 295/70/17
ramoine is offline   Reply With Quote
Old 08-15-2010, 10:49 PM   #15
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-15-2010, 11:06 PM   #16
MysticZ
4wd Twin Stick Newbie
 
MysticZ's Avatar
 
Join Date: Oct 2007
Location: Norcal
Posts: 2,141
Default

The bajarack's are really nice I have had my mule rack on my crossbars for awhile now and only problem I had is the crossbar ends getting loose but that can be easily fixed with shims.
__________________
2005 T4R Silver SR5 V6 4wd with Mods.
2005 Sandwich Truck with Many Mods.
2013 Prius Red with No Mods.

RST www.rocksolidtoys.com IFS 4WD Conversion Done..
MysticZ is offline   Reply With Quote
Old 08-16-2010, 12:37 PM   #17
PapaSmurf009
Peach State PreRunner
 
PapaSmurf009's Avatar
 
Join Date: Aug 2010
Location: Macon, Ga
Posts: 414
Default

Quote:
Originally Posted by MysticZ View Post
The bajarack's are really nice I have had my mule rack on my crossbars for awhile now and only problem I had is the crossbar ends getting loose but that can be easily fixed with shims.
Do you like the size of the mule or do you wish you had got the megamule? I have a sunroof so i cant decide which size to get.
PapaSmurf009 is offline   Reply With Quote
Old 08-16-2010, 12:52 PM   #18
daPitbull
Senior Driver
 
daPitbull's Avatar
 
Join Date: Jan 2007
Location: San Mateo
Posts: 821
Default

Can the "Baja Rack" fairing be flipped over so the logo doesn't show?
__________________
08' 4Runner SR5 8-banger
73' Landcruiser FJ40
daPitbull is online now   Reply With Quote
Old 08-16-2010, 06:03 PM   #19
shuly
Senior Driver
 
Join Date: Dec 2008
Posts: 926
Default

.....

Last edited by shuly; 05-16-2012 at 07:38 PM.
shuly is offline   Reply With Quote
Old 08-16-2010, 07:47 PM   #20
MysticZ
4wd Twin Stick Newbie
 
MysticZ's Avatar
 
Join Date: Oct 2007
Location: Norcal
Posts: 2,141
Default

Quote:
Originally Posted by PapaSmurf009 View Post
Do you like the size of the mule or do you wish you had got the megamule? I have a sunroof so i cant decide which size to get.
I looked at all 3 models but for my needs the mule is perfect. I can put a nice amount of gear 2 fuel cans 2 water cans and my hi lift & shovel with no problem with weight issues.
__________________
2005 T4R Silver SR5 V6 4wd with Mods.
2005 Sandwich Truck with Many Mods.
2013 Prius Red with No Mods.

RST www.rocksolidtoys.com IFS 4WD Conversion Done..

Last edited by MysticZ; 08-16-2010 at 07:52 PM.
MysticZ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Purchase Advice - Limited or TE? ArcticEd 5th Gen 4Runner 28 09-16-2010 02:35 PM
PIAA 510 ATP installed Ryan_S Audio, Electronics and Electrical 2 08-04-2010 11:24 AM
Just Installed my Bajarack aws24689 Outfitting 27 06-09-2010 03:02 PM
2003 4Runner Limited Front Brake Size & Upgrading artspeed 4th Gen 4Runner & Hilux Surf 19 03-26-2010 05:42 AM
Wyoming 2007 Vegas Runner Meeting, Trail run and Expedition reporting 9 11-28-2007 02:13 PM


Buy your Toyota120 sticker!

All times are GMT -7. The time now is 08:11 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005-2013 Toyota120.com